Cetol et al…

Started the Cetol process; first coat of three…




Some accent Cetol in the cockpit as well.



These are the drop boards that close the companionway in photo above.



I started installing the caps on the cockpit coamings. Starboard side for reference…  These also serve to seal the end grain of the 1/3″ ply sides. The bilge panals are 3/8″ and the bottom 1″ ply (doubled 1/2″ ply) .



Port side glued and clamped. I will trim oversized strip tomorrow.



Shoe and I got the boat back down level on the trailer now that the lee board is installed.


Next up the ballast, trailer post and winch, and motor testing among other things!

Un Abrazo,



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: