Rainy Day Work


100_1209-001Above: Lousy Photo of rudder blade screwed/glued/clamped on bench curing under lamps. It screwed up flat so I could do it this way .


Below is the Leeboard; it had a decided bow lengthwise so I used 3 @  5o lb elevator test weights to hold it flat while I got it screwed/glued/clamped up.  Good squeeze out all around on both pieces.  Not too tight so there is still epoxy in the joint…




100_1207-001Another shot.  No cat this time, as epoxy and cat fur are not composetic!  I mix up epoxy and squeegee it on both pieces, thinly. Then mix up a slightly thickened batch and spread it with a saw-tooth edged squeegee (about 1/8″ + teeth) on only one face, and then re-join them so all the “stripes” can squeeze out evenly.  Now we wait……

Un Abrazo,






1 Comment (+add yours?)

  1. Kathleen
    Mar 30, 2014 @ 05:15:06

    Thats ok. Im still a fan!


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: