Taped and seamed through cabin.
31 Jul 2011 Leave a Comment
Yesterday, Saturday, I got the after half of the cabin taped and seamed. Today, Sunday, I got all the rest done inside the cabin except where the temporary form is located.
Ready to fillet and tape.
As explained in the video, I was able to bring the bilge panels flat to the bulkhead using these 2×2′s.
The screw through the bilge panel in the middle of the 2×2 pulled the panel flat. This trick probably won’t work for the next bulkhead where the span is shorter and the curve more pronounced.
Still shot of fore-cabin all taped up.
I am hoping to get wales spliced up this PM if all goes well.
Un Abrazo,
Bill
Advertisement
